Cut to size service

Cut to size service

If you can't find the size you require in our standard range we also offer a Cut-To-Size service.

Our Cut-To-Size service is available on all products where this icon appears 

Once you've selected the style that you want, use the following guide to measure your windows :

 

MEASUREMENT TIPS

OUTSIDE MOUNT ON TO ARCHITRAVE

Use a tape measure to determine the exact external measurement in millimetres, then write them down in table format, similar to below. Please note that your measurements should include the architrave.

OUTSIDE MOUNT ON TO WALL

Use a tape measure to determine the exact external measurement in millimetres, then write them down in table format, similar to below. Measurements should account for fixing of blind into timber studs (if not being fixed to the architrave).

INSIDE MOUNT

Use a tape measure to determine the exact internal measurement in millimetres, then write them down in table format, similar to below. Make sure you include width measurements at top and bottom. Ensure window winders or sills will not interfere with the blind once installed.

GENERAL INFORMATION

Depending on your window measurements and preferred installation method, the appropriate blind that can be used for our Cut-To-Size service may differ from what is available in-store.

For some blind widths, a 2100mm drop blind must be purchased and used to complete the Cut-To-Size process, even if the requested drop is less than 1500mm.

AVAILABLE SIZES

  • 390mm – 2100mm wide up to 1500mm drop
  • 390mm – 1800mm wide up to 2100mm drop

Once you have made your selection and have your measurements, take them to a Bunnings Special Orders Desk for size confirmation and ordering.